MX-10

SYSTEM RECOMMENDATIONS

Minimum screen size 16:9
95″ (2103mm x 1183mm)

Minimum screen size 21:9
100″ (2335mm x 1001mm)

‍

LCR SPEAKER MODULES

Frequency range
40Hz-20kHz in room response

Power handling
100 – 500 Watts RMS recommended amplifier power

Sensitivity
97dB for 2.83 volts at 1 metre

Impedance
8 Ohms

Configuration
2-way

Enclosure type
Bass reflex, front vented

Low frequency driver
Single 255mm (10”) paper cone driver. 50mm (2”) voice coil wound on high powered kapton former, with ventilated magnet assembly and copper shorting ring for low distortion

High frequency driver
26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled. Coupled to a Krix designed 90 x 40 short throw waveguide

Input terminals
Nickel plated spring terminals featuring a 5mm hole to accept up to 10AWG cable

Dimensions
940mm high x 315mm wide x 205mm deep (2040mm wide including subwoofer modules)

Weight
15kg each

‍

SUBWOOFER MODULES

Frequency range
25Hz-200Hz in room response

Power handling
200 – 500* Watts RMS recommended amplifier power
* The use of a power amplifier with high pass filter and soft limiter function is strongly recommended on MX subwoofers.

Recommended processing
High pass filter: 30Hz 24dB / Octave Butterworth
Limiter: 500W (4 Ohms)

Sensitivity
92dB for 2.83 volts at 1 metre

Impedance
4 Ohms

Enclosure type
Bass reflex, down-firing vents

Low frequency driver
Nominal 305mm (12”) diameter paper cone driver with 50mm (2”) long throw voice coil developed for high level, low frequency reinforcement

Input terminals
High level gold plated spring terminals

Dimensions
940mm high x 540mm wide x 205mm deep (2025mm wide including LCR modules)

Weight
26kg each