MX-20

SYSTEM RECOMMENDATIONS

Recommended room depth
4m – 7m

Minimum screen size 16:9
105″ (2324mm x 1308mm)

Minimum screen size 21:9
130″ (3035mm x 1301mm)

‍

LCR SPEAKER MODULES

Frequency range
40Hz-20kHz in room response

Power handling
100 – 500 Watts RMS recommended amplifier power

Recommended processing
High pass filter: 25Hz 24dB / Octave Butterworth
Limiter: 1000W (8 Ohms)

Sensitivity
97dB for 2.83 volts at 1 metre

Impedance
8 Ohms

Configuration
2-way

Enclosure type
Bass reflex, front vented

Low frequency driver
Single 255mm (10”) paper cone driver. 50mm (2”) voice coil wound on high powered kapton former, with ventilated magnet assembly and copper shorting ring for low distortion

High frequency driver
26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled. Coupled to a Krix designed 90 x 40 short throw waveguide

Input terminals
Nickel plated spring terminals featuring a 5mm hole to accept up to 10AWG cable

Dimensions
1220mm high x 365mm wide x 295mm deep (2210mm wide including subwoofer modules)

Weight
31kg each

‍

SUBWOOFER MODULES

Frequency range
25Hz-200Hz in room response

Power handling
200 – 1400 Watts RMS recommended amplifier power

Recommended processing
High pass filter: 25Hz 24db / Octave Butterworth Limiter: 1000W (8 Ohms)

Sensitivity
96dB for 2.83 volts at 1 metre

Impedance
8 Ohms

Enclosure type
Bass reflex, front vented

Low frequency driver
Single 380mm (15”) paper cone driver. 100mm (4”) edge-wound copper voice coil, dual spider assembly and vented magnet assembly

Input terminals
High level gold plated spring terminals

Dimensions
1220mm high x 550mm wide x 295mm deep (2210mm wide including LCR modules)

Weight
45kg each