MX-5

SYSTEM RECOMMENDATIONS

Minimum screen size 16:9
95″ (2103mm x 1183mm)

Minimum screen size 21:9
92″ (2148mm x 921mm)

‍

LCR SPEAKER MODULES

Frequency range
40Hz-20kHz in room response

Power handling
100 – 300 Watts RMS recommended amplifier power

Sensitivity
92dB for 2.83 volts at 1 metre

Impedance
8 Ohms

Configuration
2-way

Enclosure type
Bass reflex, front vented

Low frequency driver
Single 205mm (8”) paper cone driver. 38mm (1½”) voice coil wound on high powered aluminium former, with ventilated magnet assembly and copper shorting ring for low distortion

High frequency driver
26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled. Coupled to a Krix designed 90 x 40 short throw waveguide

Input terminals
Gold plated spring terminals

Dimensions
700mm high x 315mm wide x 190mm deep (2040mm wide including subwoofer modules)

Weight
12kg each

‍

SUBWOOFER MODULES

Frequency range
30Hz-200Hz in room response

Power handling
200 – 350* Watts RMS recommended amplifier power
* The use of a power amplifier with high pass filter and soft limiter function is strongly recommended on MX subwoofers.

Recommended processing
High pass filter: 30Hz 24dB / Octave Butterworth
Limiter: 350W (4 Ohms)

Sensitivity
90dB for 2.83 volts at 1 metre

Impedance
4 Ohms

Enclosure type
Bass reflex, down-firing vent

Low frequency driver
Nominal 275mm (11”) diameter doped paper cone driver, 50mm (2”) voice coil wound on high powered Kapton former with vented magnet assembly

Input terminals
High level gold plated spring terminals

Dimensions
700mm high x 540mm wide x 190mm deep (2040mm wide including LCR modules)

Weight
19kg each