HARMONIX MK2

Frequency range

35Hz-40kHz in room response

Power handling

50 – 250 Watts RMS recommended amplifier power

Sensitivity

90dB for 2.83 volts at 1 metre

Impedance

Nominally 6 Ohms (minimum 3.1 Ohms)

Configuration

3-way

Enclosure type

Dual chambers – sealed midrange chamber with bass reflex main chamber. Front vented with internal and external flaring

Low frequency drivers

2 x nominal 165mm (6½”) laminated polypropylene cones. 33mm (1¼”) voice coil wound on high powered aluminium former, with ventilated spider and aluminium flux stabilization ring for low distortion

Mid frequency driver

1 x nominal 130mm (5″) coated paper cone. 26mm (1″) voice coil wound on high powered aluminium former, using copper shorting ring and oversized magnet for lower distortion

High frequency driver

25mm (1″) dual concentric diaphragm with wave-guide centre plug for controlled directivity. Non-reflective dual chambered magnet structure with copper shorting ring to lower distortion

Input terminals

Dual gold plated bi-wire binding posts (bi-wireable, bi-ampable)

Dimensions

1040mm high x 220mm wide x 350mm deep (including feet)

Weight

28kg each